Gtset, Hex Mode Configuration - Fibocom G510 User Manual

>0123456789abc
OK
+MIPPUSH: 2,0
+MIPSEND: 2,0,2048
OK

13.2.4+GTSET, HEX mode configuration

Command
Set
The following table shows the +GTSET parameters related HEX mode.
<Parameter>
<future>
<value>
<future>
<value>
Example:
Opening socket 2 already.
AT+GTSET="IPRFMT",0
AT Commands User Manual
Syntax
+GTSET=<future>,<value>
Description
"SENDTIME": Set the auto push timeout.
1-30 seconds
The default value is 12.
"IPRFMT" :
0: Received data with "+MIPRTCP:" and the data is encoded.
1: Received data only and the data are without encoded. In received
character string, Module doesn't accede to any <CR><LF> symbol.
2: Received data with "+MIPRTCP:" and the data is without encoded. In
received character string, Module will accede to <CR><LF> before
"+MIPRTCP:".
5: Data read mode
The default value is 0.
Response/Action
OK
or:
ERROR
The format of received data.
Page 234 of 243