Mipstat, Status Report - Fibocom G510 User Manual

TimeSpan
Example:
AT+MIPDSETS=1,256,500
OK
When received 512 bytes from network, there are two +MIPRUDP message report to user:
+MIPRUDP: 172.16.3.135,222,2,256,313233........373839
// time span is 500ms
+MIPRUDP: 172.16.3.135,222,2,0,313233........373839

13.1.12 +MIPSTAT, Status Report

This unsolicited event is sent to the terminal indicating a change in status. Currently there are two
possible sources of failure, a broken logical connection or a broken physical connection.
Syntax
+MIPSTAT: <socket_ID>,<n>[,<number_of_acknowl d_bytes >]
The following table shows the +MIP STAT parameters.
<Parameter>
<Socket_ID>
<n>
<number_of_acknowl d_bytes>
Example:
+MIPSTAT: 1,2
AT Commands User Manual
128< = size <= 2048
The default value is 1372.
0 - 1000 mS
0 means no timeSpan is used (default).
Description
A unique number that identifies a connection.
Valid socket numbers - 1, 2, 3 and 4
0 - ACK indication
1 - Broken protocol stack
2 - Connection closed automatically due to non – fatal alert
Total number of bytes that were acknowledged
// the first 256 bytes
// the last 256 bytes
Page 214 of 243