Creg, Network Registration Status - Fibocom G510 User Manual

9.1.2 +CREG, Network Registration Status

Command
Set
Read
Test
The following table shows the +CREG parameters.
<Parameter>
<n>
<stat>
G5/G6-Family AT Commands User Manual
Syntax Response/Action
AT+CREG OK
=[<n>]
or:
+CME ERROR:
<err
AT+CREG +CREG:
? <n>,<stat>[,<lac>,
<ci>]
OK
AT+CREG +CREG:
=? supported <n>s)
OK
Description
0 Disables the network registration unsolicited result code.
1 Enables the network registration unsolicited result code +CREG:
<stat>.
2 Enables the network registration and location information in unsolicited
reports and Read command +CREG: <stat>[,<lac>,<ci>].
The default value is 0.
0 Not registered, and the ME is not currently searching for a new
operator to which to register.
1 Registered, home network.
2 Not registered, but the ME is currently searching for a new operator to
which to register.
3 Registration denied.
4 Unknown.
Remarks
The Set command controls the
presentation of an unsolicited result code
and the result of the Read operation.
The Read command returns the status of
the result code presentation and shows
whether the network has currently
indicated the registration of the Module.
Location information elements <lac> and
<ci> are returned only when <n>=2 and the
Module is registered in the network.
(list of
Page 130 of 243