Ccwa Indication - Fibocom G510 User Manual

Test +CCWA=?

5.1.10+CCWA Indication

When a call-waiting indication is enabled by the Module (<n>=1), the following unsolicited indication is
sent to the terminal from the Module:
+CCWA: <number>,<type>,<class>[,<alpha>] [,<CLI validity>]
The following table shows the +CCWA parameters.
<Parameter>
<n>
<mode>
<class>
<"number">
<type>
<status>
G5/G6-Family AT Commands User Manual
+CCWA: (list of
supported <n>s)
OK
Description
Enables/disables the call waiting indication to the terminal by the Module.
0 - Disable
1 - Enable
The default value is 0.
Call waiting service request to the network. When the <mode> parameter is
not given, the network is not interrogated.
0 - Disable
1 - Enable
2 - Query status
Sum of integers each representing a class of information.
1 - Voice (telephony)
The default value is 1.
Calling line number. The number format is specified by <type>.
Type of address octet in integer format:
145 - Default when the dialing string includes the international access code
character "+".
161 - Default when making a local call.
129 - Type of number is unknown (usually the output when the number itself
is unknown)
Call waiting support by the network (output for <mode>=2).
indication in the Module (<n>).
The Test command returns <n> values
supported by the Module as a compound
value.
Page 49 of 243