Cband, Change Radio Band - Fibocom G510 User Manual

9.1.14

+CBAND, Change Radio Band

This command allows to switch from automatic band selection to selection of one or more (up to four)
bands from the following:
- 850 MHz
- 900 MHz
- 1800 MHz
- 1900 MHz
Command
Set
Read
G5/G6-Family AT Commands User Manual
10 Neighbor 5 Cell Information screen
11 Neighbor 6 Cell Information screen
12 Neighbor Cells Summary screen
13 Re-selection screen
14 Hopping Information screen
15 PDP1 Context Information screen
16 PDP2 Context Information screen
17 PDP3 Context Information screen
18 PDP4 Context Information screen
19 Serving Cell paging parameters
20 Optional SYSINFOs
21 Serving and Neighbor Cells Information screen
22 Serving Cell Information screen
23 Neighbor Cells Information screen
24 The LAC and Cell ID of Serving and Neighbor Cells I
Syntax
AT+CBAND=[<band_1>[,<ban
d_2>[,<band_3>[,<band_4>]]]]
AT+CBAND?
Response/Action
OK
or
CME ERROR: <err>
+CBAND:
[<band_1>[,<band_2>[,<band_3>[,<band_4>]]
Page 149 of 243