Results Code Structure; Command Syntax - Fibocom G510 User Manual

Example:
AT+CSQ<CR>
ATS24?<CR>
An AT command line may contain one or more commands. Delimiters are used to separate the
commands from each other. The delimiter is either a semicolon ";" or none, meaning space (basic
commands).
Example:
ATS0=1V1Q0E0<CR>
AT+IFC=0,0;+ICF=3,4;+CNMI
=2,1,0,0,0<CR>

2.4.3 Results Code Structure

By default, the module responds with verbose response codes. The results code prefix is <CR><LF>. The
results code suffix is <CR><LF>.
Example:
<CR><LF>+CSQ: 99,99<CR><LF>
<CR><LF>OK<CR><LF>
The Unsolicited results code is same as the Results code.

2.5 Command Syntax

Execute command syntax
Parameter set command syntax
Parameter read Command syntax
Parameter test Command syntax
<Value> consists of either a numeric constant or a string constant. <compound_value> consist of several
<value> parameters separated by commas.
G5/G6-Family AT Commands User Manual
AT+xxx
ATxxx
ATxxx;
AT+xxx=<Value>
ATxxx=<Value>
AT+xxx?
ATxxx?
AT+ xxx =?
ATxxx?
Page 14 of 243