Ceer, Extended Error Report - Fibocom G510 User Manual

The following table shows the +CMEE parameters.
<Parameter>
<n>
Example:
AT+CMEE=0
OK
AT+VTD
ERROR
AT+CMEE=1
OK
AT+VTD
+CME ERROR: 3
AT+CMEE=2
OK
AT+VTD
+CME ERROR: operation not allowed

4.3.2 +CEER, Extended Error Report

This execution command returns an extended error report containing one or more lines of information text
<report>, determined by the manufacturer, providing reasons for the following errors:
 Failure in the last unsuccessful call setup (originating or answering) or the in-call modification.
 Last call release.
Typically, the text consists of a single line containing the reason for the error according to information
given by GSM network, in textual format.
Command
Execute
Test
G5/G6-Family AT Commands User Manual
Description
0 Disable the +CME ERROR: <err> result code and use ERROR.
1 Enable the +CME ERROR: <err> or +CMS ERROR: <err> result codes and use
numeric <err> values or +STK ERROR: <err> result codes and use numeric <err>
values.
2 Enable the +CME ERROR: <err> or +CMS ERROR: <err> result codes and use
verbose <err> values or +STK ERROR: <err> result codes and use numeric <err>
values.
The default value is 0.
//+CME ERROR is not used
//Use numeric <err>
//Use verbose <err>
Syntax
AT+CEER
AT+CEER=?
Response/Action
+CEER: <report>
OK
OK
Page 37 of 243