Phone And Date Books And Clock; Directory Access Commands - Phone Book; Cpbs, Select Phone Book Memory; This Command Handles The Selection Of The Memory To Be Used For Reading And Writing Entries In The Module's Phone Book's Memory - Fibocom G510 User Manual

6 Phone and Date Books and Clock

6.1 Directory Access Commands - Phone Book

This set of commands enables read/write access to the phone book contained within the Module,
including both the numeric and the alpha information contained in the location. The presentation is
according to GSM 07.07.
In some cases, it may be possible to use these commands to access the dialed and received call stacks.
However, as these phone books cannot be edited, the +CPBW command does not work on them.

6.1.1 +CPBS, Select Phone Book Memory

6.1.2 This command handles the selection of the memory to be used
for reading and writing entries in the Module's phone book's
memory.
Command Syntax
Set
AT+CPBS=<storage>[,<
pin2>]
<pin2>is optional while
<storage> = "FD" only
Read +CPBS?
Test +CPBS=?
Note: Read format of +CPBS joins RC and MC, therefore the united list will be prompted.
The following table shows the +CPBS parameters.
<Parameter>
<storage>
G5/G6-Family AT Commands User Manual
Response/Action
OK
or:
+CME ERROR:
<err>
+CPBS:
<storage>
[,<used>,<tot
al>]
OK
+CPBS: (list of
supported<storag
e>s)
OK
Description
List of supported phone books and their storage IDs
Remarks
The Set command selects the phone
book memory storage which is to be
used by other phone book
commands.
The Read command returns the
currently selected phone book
memory, number of used entries and
total number of entries in the phone
book memory.
Test command returns the supported
storage as a compound value.
Page 75 of 243