9.1.15
+GTPLMNLS, Clear Arfcn list
This command allows to Clear Arfcn list and PLMN from nv,that the Arfcn and PLMN is saved after the last
register network. So the time of register network is longer after clear Arfcn and PLMN.
Command
Set
Read
Test
PLMN is MCC and MNC; COUNT is number of frequency points; ARFCN is frequency points
The following table shows the +GTPLMNS parameters.
<Parameter>
n
Example:
AT+GTPLMNLS?
[SIM0]PLMN:64,f0,10
[SIM0]COUNT:19
[SIM0]ARFCN:637,644,645,647,648,649,650,655,658,660,662,665,100,109,112,120,121,124,6
56,0,0,0,0,0,0,0,0,0,0,0,0,0,0
[SIM1]PLMN:0,0,0
G5/G6-Family AT Commands User Manual
Syntax
AT+GTPLMNLS=n
AT+GTPLMNLS?
AT+ GTPLMNLS =?
Description
1
Clear Arfcn list and PLMN of SIM1 from nv
2
Clear Arfcn list and PLMN of SIM2 from nv
Response/Action
OK
or
CME ERROR: <err>
[SIM0]PLMN:
[SIM0]COUNT:
[SIM0]ARFCN:
[SIM1]PLMN:
[SIM1]COUNT:
[SIM1]ARFCN:
OK
ERROR
Page 151 of 243