Dl, Dial Last Number - Fibocom G510 User Manual

<n>
<"mem">
Example:
AT+CPBS="SM"
OK
AT+CSCS="IRA"
OK
AT+CPBW=1,"035659090",129,"VoiceMail"
OK
AT+CPBR=1
+CPBR: 001,"035659090",129,"VoiceMail"
OK
atd>"VoiceMail";
OK
OK
ath
NO CARRIER
OK

5.1.3 DL, Dial Last Number

The DL command places a voice call to the last number dialed. The call progress information
(success/failure) is reported in the same way as for the Dial command.
Command
ATDL[;]
G5/G6-Family AT Commands User Manual
book entry. The used character set should be the one selected with Select
Terminal Character Set +CSCS. <alpha> is case-sensitive, and should be
placed in quotes ("alpha").
This parameter is also called "speed dial location". It is an integer type
memory location. <n> should be in the range of locations available in the
memory used.
This parameter is not case-sensitive.
//Phonebook by name
Detailed Description
Initial Response - Last Number retrieved:
ATDL: <DIAL DIGITS>
1st response - Voice call placement begins
OK
2nd response - Voice call connected OK
Page 41 of 243