Figure 1.1 Base Module Front View; Table 1.1 Name Of Each Component (Front Side Of The Base Module) - Fujitsu Storage ETERNUS LT140 User Manual

Chapter 1 Hardware Configuration
1.1 Module
■ External view (front)

Figure 1.1 Base Module front view

21 17
Table 1.1 Name of each component (front side of the Base Module)
No.
Button for opening the left magazine
1
Power button (*1)
2
3
4
LED panel (*1)
5
6
7
Button for opening the right magazine
8
or Mailslot
LCD screen (*1)
9
10
11
12
Operation button (*1)
13
14
15
16 USB port (*1)
17 Hole for manually releasing the left
magazine
18 Handle for pulling out the left maga-
zine
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Site Planning-
18 1 2 3 4 5 6 7
Name
Copyright 2018 FUJITSU LIMITED
10 11 12
9
16 8
Button with a status LED.
Used for opening the left magazine.
The status LED (blue) indicates the state of the left magazine.
ON/OFF power button.
Ready LED (green)
Unit Identification LED (blue)
Clean LED (amber)
Attention LED (amber)
Error LED (amber)
Button with a status LED.
Used for opening the right magazine or Mailslot.
The status LED (blue) indicates the state of the right magazine or
Mailslot.
Display screen for the operator
[×]
Back/Return button
Left button
Up button
Down button
Right button
[ ✔ ]
Enter button
For maintenance. Not used for normal operations.
Used for manually unlocking the left magazine.
Used for pulling the left magazine out of the module.
11
13 14 15
19
Detail
P3AG-3712-01ENZ0
20
21