Eternus Af650 S3; Figure 105 Front View Of A Controller Enclosure (For The Eternus Af650 S3, With A Front Cover); Figure 106 Front View Of A Controller Enclosure (For The Eternus Af650 S3, Without A Front Cover) - Fujitsu ETERNUS AF S3 Series Design Manual

4. Hardware Configurations
Controller Enclosure

ETERNUS AF650 S3

The controller enclosure of the ETERNUS AF650 S3 contains an operation panel, battery units, and drives in the
front and controllers (CMs), host interfaces (CAs), and power supply units in the rear.
●
Front View
Figure 105
1
1
Operation panel
An operation panel has LEDs, a Power switch, and setting change switches.
2
Front cover
Figure 106
1
2.5" drives
(Refer to
2
Batteries (BBU#0, BBU#1)
(Refer to
Front View of a Controller Enclosure (for the ETERNUS AF650 S3, with a Front Cover)
Front View of a Controller Enclosure (for the ETERNUS AF650 S3, without a Front Cover)
BBU#0
2
"■ Drives" (page 167).)
"■ Battery (ETERNUS AF650 S3)" (page
2
1
2
166).)
161
BBU#1
Design Guide