Chapter 2 Removal And Replacement Procedure; Spare Parts - Fujitsu MPC3032AT Maintenance Manual

CHAPTER 2
This chapter explains the procedure for removing and replacing the disk drive. It is assumed that the
reader has a thorough knowledge of replacing the complete disk drive and replacing the power-
interface cable.
When carrying out these procedures, note the following items.
The disk drive must have been removed from the host system.
A power-interface cable to the disk drive must be disconnected.
Mounting is done by reversing the steps for removal.
To carry out maintenance properly, observe the following:
Place removed screws and other parts where they will not get lost or damaged.
Keep a record of all maintenance work.
Tighten screws securely but not excessively.
Before touching the PCA, perform the human body grounding to discharge any static electricity
from your body. This ensures that the worker will not electrically damage the PCA.
2.1

Spare Parts

See Table 2.1 for the model and parts numbers to order the replacement disk drive.
REMOVAL AND REPLACEMENT
PROCEDURE
2.1 Spare Parts
2.2 Disk Drive Removal
C141-F029-01EN 2 - 1