Installing The Configurator; Starting The Configurator; Figure 182: Connection Using (A) An Ethernet Switch And (B) A Media Converter - GE P4A Technical Manual

Chapter 17 - Communications
TXA RXA
RXA TXA
V01806

Figure 182: Connection using (a) an Ethernet switch and (b) a media converter

5.8.2

INSTALLING THE CONFIGURATOR

To install the configurator:
1. Double click the WinPcap installer.
2. Double click the Configurator installer.
3. Click Next and follow the on-screen instructions.
5.8.3

STARTING THE CONFIGURATOR

To start the configurator:
1. Select the Configurator from the Windows Programs menu.
2. The Login screen appears. For user mode login, enter the Login name as User and click OK with no
password.
3. If the login screen does not appear, check all network connections.
4. The main window appears. In the bottom right-hand corner of the main window, click the Language button
to select the language.
5. The Network Board drop-down list shows the Network Board, IP Address and MAC Address of the PC in
which the Configurator is running.
362
Ethernet switch
TXB RXB
RXB TXB
IED
(a)
RJ45
Media
Converter
TX RX
RXA TXA RXB TXB
IED
(b)
P54A/B/C/E
P54xMED-TM-EN-1