GE P4A Technical Manual page 568

Appendix B - Settings and Signals
MENU TEXT
Supports trip and close commands if enabled in the Circuit Breaker Control menu. Visible to LCD+Front Port
CB Trip/Close
Supports trip and close commands if enabled in the Circuit Breaker Control menu. Visible to Rear Port
Software Ref. 1
Displays the IED software version including protocol and IED model.
Software Ref. 2
Displays the software version of the Ethernet card
Opto I/P Status
Displays the status of all available opto inputs fitted.
Relay O/P Status
Displays the status of all available output relays fitted.
Alarm Status 1
B2
COL ROW DEFAULT SETTING
00 10 No Operation
00 11
00 12
00 20
00 21
00 22
DESCRIPTION
No Operation
No Operation
No Operation
No Operation
No Operation
Trip CB2
Close CB2
[Indexed String]
No Operation
Trip
Close
No Operation
No Operation
No Operation
No Operation
No Operation
No Operation
Trip CB2
Close CB2
[Indexed String]
Software Ref. 1
[ASCII Text (16)]
Software Ref. 2
[ASCII Text (16)]
Opto I/P Status
[Binary Flag (32)
Indexed String]
Relay O/P Status
[Binary Flag (32)
Indexed String]
Setting Group via opto invalid
Test Mode Enabled
Static Test Mode
Loop Back Test Enabled
IM64 Test Enabled
VTS Indication
CTS Alarm
CT2S Alarm
Remote CTS Alarm
Power Swing
BF Block AR
CB Monitor Alarm
CB Lockout Alarm
CB Status Alarm
CB Failed to Trip
CB Failed to Close
Control CB Unhealthy
Control No Checksync
Autoclose Lockout/RLY BAR
No Healthy (AR)
No Check Sync / AR Fail
System Split Alarm
GPS Alarm
Signaling failure alarm
Signaling Propagation Delay Alarm
Differential protection failure alarm
P54A/B/C/E
AVAILABLE OPTIONS
P54xMED-TM-EN-1