GE P4A Technical Manual page 171

P54A/B/C/E
DDB Signal DDB Signal
Name Number
External Trip A 535
External Trip B 536
External Trip C 537
External Trip3ph 534
F out of Range 319
Force 3Pole Trip 533
IA< Start 864
IB< Start 865
IC< Start 866
Inhibit AR 1420
Inhibit DB 1525
Inhibit DL 1523
Inhibit LB 1524
Inhibit LL 1522
Init 3P AR Test 1507
Init APh AR Test 1504
Init BPh AR Test 1505
Init Close CB 440
Init CPh AR Test 1506
Init Trip CB 439
Live Bus 886
Live Line 888
Lockout Alarm 860
Man CB Unhealthy 304
MCB/VTS 438
MCB/VTS CB CS 1521
No C/S Man Close 305
OK Time 3P 1555
Pole Dead A 892
Pole Dead B 893
Pole Dead C 894
Pole Discrepancy 699
Reset Close Dly 443
Reset Lockout 446
Seq Counter = 0 846
P54xMED-TM-EN-1
Source Module
System Checks Voltage Monitor (59)
System Checks Voltage Monitor (59)
CB Control (43)
CB Control (43)
3-phase AR Dead Time (25)
Pole Discrepancy (62)
Sequence Counter (18)
Chapter 7 - Autoreclose
Destination Module
1-pole / 3-pole trip, AR In Progress, CB Control
1-pole / 3-pole trip, AR In Progress, CB Control
1-pole / 3-pole trip, AR In Progress, CB Control
1-pole / 3-pole trip, AR In Progress, CB Control
Check Sync Signals
CB Trip Conversion
AR Initiation
AR Initiation
AR Initiation
AR In Progress, Force 3-phase Trip
System Checks Voltage Monitor
System Checks Voltage Monitor
System Checks Voltage Monitor
System Checks Voltage Monitor
Trip Test
Trip Test
Trip Test
CB Control
Trip Test
CB Control
3 Phase AR System Check
CB Manual Close System Check
3 Phase AR System Check
CB Manual Close System Check
AR In Progress
Pole Discrepancy
System Checks Voltage Monitor
System Checks Voltage Monitor
Dead Time Start Enable
3-phase AR Dead Time
CB Autoclose
Prepare Reclaim Initiation
CB Healthy and System Check Timers
CB Trip Conversion
CB Trip Conversion
CB Trip Conversion
Pole Discrepancy
CB Control
Reset CB Lockout
AR Modes Enable
145