GE P4A Technical Manual page 691

P54A/B/C/E
MENU TEXT
Meas Scaling
DNP 3.0 over Ethernet versions only. Setting to report analogue values in terms of primary, secondary or normalized (with respect to the
CT/VT ratio setting) values.
NIC Tunl Timeout
DNP 3.0 over Ethernet versions only. Duration of time waited before an inactive tunnel to MiCOM S1 Studio is reset.
NIC Link Report
DNP 3.0 over Ethernet versions only.
Configures how a failed/unfitted network link (copper or fibre) is reported:
Alarm - an alarm is raised for a failed link
Event - an event is logged for a failed link
None - nothing reported for a failed link
SNTP PARAMETERS
DNP 3.0 over Ethernet versions only
SNTP Server 1
DNP 3.0 over Ethernet versions only. Indicates the SNTP Server 1 address.
SNTP Server 2
DNP 3.0 over Ethernet versions only. Indicates the SNTP Server 2 address.
SNTP Poll Rate
DNP 3.0 over Ethernet versions only. Duration of SNTP poll rate in seconds.
DNP Need Time
DNP 3.0 versions only. The duration of time waited before requesting another time sync from the master.
DNP App Fragment
DNP 3.0 versions only. The maximum message length (application fragment size) transmitted by the IED.
DNP App Timeout
DNP 3.0 versions only. Duration of time waited, after sending a message fragment and awaiting a confirmation from the master.
DNP SBO Timeout
DNP 3.0 versions only. Duration of time waited, after receiving a select command and awaiting an operate confirmation from the master.
Class 0 Poll
Used for DNP3 over Ethernet only.
When set the cell to "Running Counters", the IED will only report the static counters (object 20) in class 0 responses. Otherwise if set to
"Frozen Counters", the IED will only report the frozen counters (object 21) in class 0 responses.
SNMP PARAMETERS
SNMP specific parameters heading.
SNMP Version
Selection for the main processor SNMP version interface. Selecting 'None' disables this SNMP interface.
Trap Dest. IP1
Trap destination 1 IP for the main processor SNMP version interface. This is set to the SNMP manager IP address.
Setting this cell to 0.0.0.0 disables this Trap interface
Trap Dest. IP2
P54xMED-TM-EN-1
COL ROW DEFAULT SETTING
0E A6 Primary
0E A7 5
0E A8 Alarm
0E AA
0E AB 0.0.0.0
0E AC 0.0.0.0
0E AD 64
0E B1 10
0E B2 2048
0E B3 2
0E B4 10
0E B5 Running Counters
0E C0
0E C1 V2C and V3
0E C2 0.0.0.0
0E C3 0.0.0.0
DESCRIPTION
Normalised
Primary
Secondary
[Indexed String]
From 1 to 30 in steps of 1
[Courier Number (time-minutes)]
Alarm
Event
None
[Indexed String]
SNTP Server 1
[ASCII Text]
SNTP Server 2
[ASCII Text]
SNTP Poll Rate
[ASCII Text]
From 1 to 30 in steps of 1
[Courier Number (time-minutes)]
From 100 to 2048 in steps of 1
[Unsigned Integer (32 bits)]
From 1 to 120 in steps of 1
[Courier Number (time-seconds)]
From 1 to 10 in steps of 1
[Courier Number (time-seconds)]
0 or 1
[Indexed String]
None
V2C
V3
V2C and V3
[Indexed String]
From 0.0.0.0 to 223.255.255.255 in steps of 1
[Unsigned Integer (32 bits)]
From 0.0.0.0 to 223.255.255.255 in steps of 1
[Unsigned Integer (32 bits)]
Appendix B - Settings and Signals
AVAILABLE OPTIONS
B125