Installing/Upgrading 489Pc - GE 489 Instruction Manual

8 489PC SOFTWARE
Installation/upgrade of the 489PC software is accomplished as follows:
1. Ensure that Windows is running on the local PC
2. Insert the GE Power Management Products CD into your computer or point your web browser to the GE Power Man-
agement website at www.GEindustrial.com/pm. With Windows95/98, the Products CD will launch the wel-
come screen (see figure below) automatically; with Windows 3.1, open the Products CD by opening the index.htm
file in the CD root directory with a web browser.
The Products CD is essentially a "snapshot" of the GE Power Management website at the date printed on the CD. As such,
the procedures for installation from the CD or the website are identical; however, to ensure that the newest version of
489PC is installed, installation from the web is preferred.
Figure 8–1: GE POWER MANAGEMENT WELCOME SCREEN
3. Click the Index by Product Name item from the Products menu of the left side of the page then select 489 Generator
Management Relay from the product list to open the 489 product page.
4. Click the Software item from the Resources list to open the 489 software page.
5. The latest version of 489PC will be shown (see previous page). Select the Download 489PC Software item to down-
load the installation program. Run the installation program and follow the prompts to install the 489PC software. When
complete, a new GE Power Management group window will appear containing the 489PC icon.
GE Power Management 489 Generator Management Relay
8.1 INSTALLATION/UPGRADE

8.1.4 INSTALLING/UPGRADING 489PC

8
8-3