Last-Member-Query-Interval (Igmp View) - HP 5900 Series Command Reference Manual

Examples
# Set the global IGMP last member query count to 6 on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] last-member-query-count 6
Related commands
igmp last-member-query-count

last-member-query-interval (IGMP view)

Use last-member-query-interval to set the global IGMP last member query interval.
Use undo last-member-query-interval to restore the default.
Syntax
last-member-query-interval interval
undo last-member-query-interval
Default
The global IGMP last member query interval is 1 second.
Views
IGMP view
Predefined user roles
network-admin
Parameters
interval: Sets an IGMP last member query interval in the range of 1 to 25 seconds.
Usage guidelines
This command and the igmp last-member-query-interval command have the same function but different
effective ranges:
The last-member-query-interval command in IGMP view takes effect on all interfaces.
•
The igmp last-member-query-interval command takes effect on the current interface.
•
For an interface, the igmp last-member-query-interval command takes priority over the
last-member-query-interval command in IGMP view.
Examples
# Set the global IGMP last member query interval to 6 seconds on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] last-member-query-interval 6
Related commands
igmp last-member-query-interval
104