HP 5900 Series Command Reference Manual page 55

Predefined user roles
network-admin
Parameters
version-number: Specifies an IGMP snooping version, 2 or 3.
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its
ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The value range for the VLAN ID is 1
to 4094.
Usage guidelines
You must enable IGMP snooping for the specified VLANs before you execute this command.
This command and the igmp-snooping version command have the same function but different effective
ranges:
The version command in IGMP-snooping view takes effect on the specified VLANs.
•
• The igmp-snooping version command takes effect on the current VLAN.
For a VLAN, the igmp-snooping version command and the version command in IGMP-snooping view
have the same priority, and the most recent configuration takes effect.
Examples
# Enable IGMP snooping for VLAN 2 through VLAN 10, and specify IGMP snooping version 3 for these
VLANs.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] enable vlan 2 to 10
[Sysname-igmp-snooping] version 3 vlan 2 to 10
Related commands
enable (IGMP-snooping view)
•
igmp-snooping enable
•
45