Display Ipv6 Multicast Boundary - HP 5900 Series Command Reference Manual

Table 74 Command output
Field
Interface
Index
Current state
MTU
Type
Protocol
PIM protocol state
Address list
Local address
Remote address
Reference
State

display ipv6 multicast boundary

Use display ipv6 multicast boundary to display IPv6 multicast boundary information.
Syntax
display ipv6 multicast [ vpn-instance vpn-instance-name ] boundary { group [ ipv6-group-address
[ prefix-length ] ] | scope [ scope-id ] } [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays IPv6 multicast
boundary information on the public network.
group: Displays the IPv6 multicast boundary information for the specified group.
Description
Interface name.
Index number of the interface.
Current status of the interface: up or down.
MTU value.
Interface type:
•
BROADCAST—Broadcast link interface.
•
LOOP—Loopback interface.
•
REGISTER—Register interface.
•
NBMA—NBMA interface.
•
MTUNNEL—Multicast tunnel interface.
Protocol running on the interface: PIM-DM, PIM-SM, or MLD.
Whether IPv6 PIM is enabled:
•
Enabled
•
Disabled
Interface address list.
Local IP address.
Remote end IP address. This field is displayed when the interface is vlink type.
Number of times that the address has been referenced.
Status of the interface address: NORMAL or DEL.
256