HP 5900 Series Command Reference Manual page 324

Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays IPv6 PIM routing
entries on the public network.
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address in the range of FFxy::/16,
where "x" and "y" represent any hexadecimal numbers from 0 to F. If you do not specify an IPv6
multicast group, the command displays IPv6 PIM routing entries for all IPv6 multicast groups.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address.
prefix-length: Specifies a prefix length of the IPv6 multicast group or IPv6 multicast source address. The
default value is 128. For an IPv6 multicast group address, the value for this argument is in the range of
8 to 128. For an IPv6 multicast source address, the value for this argument is in the range of 0 to 128.
flags flag-value: Specifies a flag. If you do not specify a flag, the command displays IPv6 PIM routing
entries that contain all flags.
The following lists the values for the flag-value argument and their meanings:
act: Specifies IPv6 PIM routing entries that have been used for routing data.
•
• del: Specifies IPv6 PIM routing entries to be deleted.
exprune: Specifies IPv6 PIM routing entries that contain outgoing interfaces pruned by other IPv6
•
multicast routing protocols.
ext: Specifies IPv6 PIM routing entries that contain outgoing interfaces provided by other multicast
•
routing protocols.
loc: Specifies IPv6 PIM routing entries on the devices that reside on the same subnet as the IPv6
•
multicast source.
niif: Specifies IPv6 PIM routing entries that contain unknown incoming interfaces.
•
• nonbr: Specifies IPv6 PIM routing entries with IPv6 PIM neighbor lookup failure.
rpt: Specifies IPv6 PIM routing entries on the RPT branches where (S, G) prunes have been sent to
•
the RP.
spt: Specifies IPv6 PIM routing entries on the SPT.
•
swt: Specifies IPv6 PIM routing entries in the process of RPT-to-SPT switchover.
•
wc: Specifies IPv6 PIM routing entries with wildcards.
•
fsm: Displays detailed information about the finite state machine.
incoming-interface interface-type interface-number: Specifies an incoming interface. If you do not
specify an incoming interface, the command displays IPv6 PIM routing entries that contain all incoming
interfaces.
interface-type interface-number: Specifies an interface by its type and number.
mode mode-type: Specifies an IPv6 PIM mode. If you do not specify an IPv6 PIM mode, the command
displays IPv6 PIM routing entries in all modes. The available IPv6 PIM modes include:
bidir: Specifies IPv6 BIDIR-PIM.
•
dm: Specifies IPv6 PIM-DM.
•
• sm: Specifies IPv6 PIM-SM.
ssm: Specifies IPv6 PIM-SSM.
•
outgoing-interface { exclude | include | match } interface-type interface-number: Specifies an outgoing
interface. If you do not specify an outgoing interface, the command displays IPv6 PIM routing entries that
314