Query-Interval (Mld View) - HP 5900 Series Command Reference Manual

Syntax
other-querier-present-timeout time
undo other-querier-present-timeout
Default
The MLD other querier present timer is calculated by the following formula:
[ MLD general query interval ] × [ MLD querier's robustness variable ] + [ maximum response time for
MLD general queries ] / 2.
Views
MLD view
Predefined user roles
network-admin
Parameters
time: Sets an MLD other querier present timer in the range of 1 to 31744 seconds.
Usage guidelines
This command and the mld other-querier-present-timeout command have the same function but different
effective ranges:
The other-querier-present-timeout command takes effect on all interfaces.
•
The mld other-querier-present-timeout command takes effect on the current interface.
•
For an interface, the mld other-querier-present-timeout command takes priority over the
other-querier-present-timeout command.
Examples
# Set the global MLD other querier present timer to 125 seconds on the public network.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] other-querier-present-timeout 125
Related commands
mld other-querier-present-timeout

query-interval (MLD view)

Use query-interval to set the global MLD general query interval.
Use undo query-interval to restore the default.
Syntax
query-interval interval
undo query-interval
Default
The global MLD general query interval is 125 seconds.
Views
MLD view
293