Jp-Pkt-Size (Ipv6 Pim View); Register-Policy (Ipv6 Pim View) - HP 5900 Series Command Reference Manual

Examples
# Set the triggered hello delay to 3 sec
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim triggered-hello-delay
jp-pk t-size (IPv6 PIM view)
Use jp-pkt-size t
Use undo jp-pkt-s
Syntax
jp-pkt-size size
undo jp-pkt-size
Default
The maximum
Views
IPv6 PIM view
Predefine d user roles
ne twork-admin
Paramete rs
size: Sets the maximum siz
Examples
# Set the maximum size of each join/prune m
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] jp-pkt-size 1500
regis ter-policy (IPv6 PIM view)
Use register-policy to configu
Use undo register-pol
Syntax
register-policy acl6-number
undo register-policy
Default
IPv6 PIM regis
Views
IPv6 PIM view
o set the maximum size of each join/prune message.
ize to restore the default.
size of a join/prune message is 8100 bytes.
e of each join/prune message, in the range of 100 to 64000 bytes.
re an IPv6 PIM register policy.
icy to remove the configured IPv6 PIM register policy.
ter policies are not configured.
onds on VLAN-interface 100.
essage to 1500 bytes on the public network.
337
3