HP 5900 Series Command Reference Manual page 177

Field
Last disconnect reason
Information about (Source,
Group)-based SA filtering policy
Information about SA-Requests
Minimum TTL to forward SA with
encapsulated data
SAs learned from this peer
SA-cache maximum for the peer
Input queue size
Description
Reason why last MSDP peering connection was torn down. If the
connection is not terminated, this field is not displayed.
•
Hold timer expired without message—Hold timer expires and the
receiving cache has no messages.
•
Hold timer expired with truncated message—Hold timer expires
and messages in the receiving cache are not intact.
bytes in buffer—Size of data in the receiving cache when the
connection was terminated.
type—Type of packets in the receiving cache when the
connection was terminated.
length—Length of packets in the receiving cache when the
connection was terminated. If the packet is too small in size, this
field cannot be resolved and is not displayed.
without packet time—Length of time since packets were last
processed.
•
Remote peer has been closed—The MSDP peering connection has
been torn down.
•
TCP ERROR/HUP event received—Error/hup event received by the
TCP socket when the MSDP peer sent messages.
•
Illegal message received—The MSDP peer received illegal
messages.
•
Notification received—The MSDP peer received notification
messages.
•
Reset command executed—The user executed the reset msdp peer
command.
•
Shutdown command executed—The user executed the shutdown
command.
•
Interface downed—The MSDP peer received the interface down
event when connecting to the remote MSDP peer.
SA message filtering list information:
•
Import policy—Filter list for receiving SA messages from the
specified MSDP peer.
•
Export policy—Filter list for forwarding SA messages from the
specified MSDP peer.
SA request information:
•
Policy to accept SA request messages—Filtering rule for receiving or
forwarding SA request messages from the specified MSDP peer. If
SA request messages are not filtered, this field displays None.
•
Sending SA requests status—Whether the MSDP peer is enabled to
send an SA request message to the designated MSDP peer after
receiving a new join message.
Minimum TT L value for the multicast packets encapsulated in SA
messages.
Number of cached (S, G) entries learned from the specified MSDP peer.
Maximum number of (S, G) entries learned from the specified MSDP
peer that the device can cache.
Data size cached in the input queue.
167