Fast-Leave (Igmp-Snooping View) - HP 5900 Series Command Reference Manual

Syntax
entry-limit limit
undo entry-limit
Default
The setting is 4
Views
IGMP-snooping view
Predefine d user roles
network-admin
Parameters
limit: Sets the global maximum number of IGMP
4294967295.
Examples
# Set the global maximum number of IGMP snooping forwarding en
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] entr
fast-le ave (IGMP-snooping view)
Use fast-leave to enable fast-leave processing globally.
Use undo fast-leave to
Syntax
fast-leave [ vlan
und o fast-leave [ vlan vlan-list ]
Default
Fast-leave processing is disabled.
Views
IGMP-snooping view
Predefine d user roles
network-admin
Paramete rs
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item
ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The value ran
to 4094. If you do not specify a VLAN, the command takes effect on all VLANs.
Usage gu idelines
Th is feature enables the switch to immediately remove a port from the forwarding entry for a multicast
group when the port receives a leave message.
294967295.
y-limit 512
disable fast-leave processing globally.
vlan-list ]
snooping forwarding entries, in the range of 0 to
15
tries to 512.
specifies a VLAN by its
ge for the VLAN ID is 1