Ipv6 Pim Timer Hello; Ipv6 Pim Timer Join-Prune - HP 5900 Series Command Reference Manual

ipv6 p im timer hello
Use ipv6 pim timer hello to se
Use undo ipv6 pim timer he
Syntax
ipv6 pim timer hello interval
undo ipv6 pim timer hello
Default
The hello inter
Views
Inte rface view
Predefine d user roles
network-admin
Parameters
interval: Sets a hello interval in the range of 0 to 18000 seconds. If you set the value to 0 seconds, the
interface does not send hello messages.
Usage guide lines
You can set the hello interval for all interfaces in IPv6 PIM view
view. The configuration made in interface view takes priority ov
view.
Examples
# Set the he
<Sysname> system-view
[Sysname] interface vlan
[Sysname-Vlan-interface100] ipv6
Related commands
timer hello (IPv6 PIM view)
ipv6 p im timer join-prune
Use ipv6 pim timer join-prune to se
Use undo ipv6 pim timer join-pru
Syntax
ipv6 pim timer join-prune interval
undo ipv6 pim timer join-prune
Default
The join/prune
Views
Interface view
t the hello interval on an interface.
llo to restore the default.
val is 30 seconds.
llo interval to 40 seconds on VLAN-interface 100.
-interface 100
ne to restore the default.
interval is 60 seconds.
pim timer hello 40
t the join/prune interval on an interface.
335
or for the current interface in interface
er the configuration made in IPv6 PIM