peer sa-cache-maximum
Use peer sa-cache-maximum to configure the maximum number of cached (S, G) entries learned from
an MSDP peer.
Use undo peer sa-cache-maximum to restore the default.
Syntax
peer peer-address sa-cache-maximum sa-limit
undo peer peer-address sa-cache-maximum
Default
The device can cache a maximum of 4294967295 (S, G) entries learned from any MSDP peer.
Views
MSDP view
Predefined user roles
network-admin
Parameters
peer-address: Specifies an MSDP peer by its IP address.
sa-limit: Specifies the maximum number of (S, G) entries that the device can cache, in the range of 1 to
4294967295.
Examples
# On the public network, enable the device to cache up to 100 (S, G) entries learned from its MSDP peer
125.10.7.6.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 sa-cache-maximum 100
Related commands
display msdp brief
•
display msdp peer-status
•
•
display msdp sa-count
peer sa-policy
Use peer sa-policy to configure an SA incoming or outgoing policy.
Use undo peer sa-policy to remove the configured SA incoming or outgoing policy.
Syntax
peer peer-address sa-policy { export | import } [ acl acl-number ]
undo peer peer-address sa-policy { export | import }
Default
All SA messages are accepted or forwarded.
178