Display Pim-Snooping Statistics - HP 5900 Series Command Reference Manual

XGE1/0/3
Table 13 Command output
Field
Total 1 entries
FSM Flag: NI-no info, J-join, PP-pr
pending
(172.10.10.1, 225.1.1.1)
FSM information
Upstream neighbor
Upstream Ports (1 in total)
Downstream Ports (2 in total)
Downstream Neighbors (2 in total)
Expires: 00:03:01, FSM: J

display pim-snooping statistics

Use display pim-snooping
snooping.
Syntax
display pim-snooping statistics
Downstream Neighbors (2 in total):
7.1.1.1
Expires: 00:59:19, FSM: J
7.1.1.11
Expi res: 00:59:20, FSM: J
Expires: 00:02 :21, FSM: PP
une
statistics to display statistics for the PIM messages learned through PIM
Description
Total number of (S, G) entries and (*, G) ent
State machine flag of the downstream port:
•
NI—Initial s tate.
•
J—Join.
•
PP—Prune pending.
(S, G) entry.
Finite state machine information of the entry:
•
delete—The entry attributes have been deleted
•
dummy—The entry is a ne
•
no info—No entry exists.
•
normal—The entry is a correct entry.
Upstream neighbor of the (S, G) or (*, G) entry.
Upstream ports, and the total number of the upstream ports.
This field is displayed if the upstream neighbor is on the master
device. Otherwise , you must specify the slot slot-number option to
display this field.
Downstream port of the upstrea
of the downstream ports.
Downstream neighbors of the downstream port, and the total
number of the downstream neighbors.
Re aining aging time for the downstream port or do m
neighbor, and the finite state machine information.
•
For a global port, this field is always displayed.
•
For a non-global port, this field is displayed if the por
master device. Otherwise, you must spec
slot-number option to display this field.
49
ries.
.
w temporary entry.
m neighbor, and the total number
wnstream
ify the slot
t is on the