Display Pim C-Rp - HP 5900 Series Command Reference Manual

Route/mask: 7.11.0.0/16 (unicast (direct))
RPF interface: Vlan-interface2, RPF neighbor: 8.0.0.2
Total number of (S,G) or (*,G) dependent on this route entry: 4
(7.11.0.10, 225.1.1.1)
(7.11.0.10, 226.1.1.1)
(7.11.0.10, 227.1.1.1)
(*, 228.1.1.1)
Route/mask: 7.12.0.0/16 (multicast static)
RPF interface: Vlan-interface2, RPF neighbor: 8.0.0.3,
Config NextHop: 8.0.0.5
Total number of (S,G) or (*,G) dependent on this route entry: 2
(7.12.0.10, 226.1.1.1)
(7.12.0.10, 225.1.1.1)
Table 39 Command output
Field
Route/mask
RPF interface
RPF neighbor
Config NextHop
Total number of (S,G) or (*,G) dependent on
this route entry

display pim c-rp

Use display pim c-rp to display C-RP information in the PIM-SM domain.
Syntax
display pim [ vpn-instance vpn-instance-name ] c-rp [ local ]
Views
Any view
Predefined user roles
network-admin
network-operator
Description
Route entry. Route types in parentheses include:
•
igp—IGP unicast route.
•
egp—EGP unicast route.
•
unicast (direct)—Direct unicast route.
•
unicast—Other unicast route, such as static unicast route.
•
multicast static—Static multicast route.
Name of the RPF interface.
IP address of the RPF neighbor.
Address of the configured next hop. This field is displayed only
when the static multicast route is configured with a next hop.
Total number of (S, G) or (*, G) entries dependent on the RPF
route and their details.
123