Display Multicast Boundary - HP 5900 Series Command Reference Manual

Field
Type
Protocol
PIM protocol state
Address list
Local address
Remote address
Reference
State

display multicast boundary

Use display multicast boundary to display multicast boundary information.
Syntax
display multicast [ vpn-instance vpn-instance-name ] boundary [ group-address [ mask-length | mask ] ]
[ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays multicast boundary
information on the public network.
group-address: Specifies a multicast group by its IP address in the range of 224.0.0.0 to
239.255.255.255. If you do not specify a multicast group, the command displays the multicast boundary
information of all multicast groups.
mask-length: Specifies an address mask length in the range of 4 to 32. The default is 32.
mask: Specifies an address mask. The default is 255.255.255.255.
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify an interface, the command displays the multicast boundary information on all interfaces.
Description
Interface type:
•
BROADCAST—Broadcast link interface.
•
LOOP—Loopback interface.
•
REGISTER—Register interface.
•
NBMA—NBMA interface.
•
MTUNNEL—Multicast tunnel interface.
Protocol running on the interface: PIM-DM, PIM-SM, IGMP, or MD.
Whether PIM is enabled:
•
Enabled.
•
Disabled.
Interface address list.
Local IP address.
Remote end IP address. This field is displayed when the interface is vlink type.
Number of times that the address has been referenced.
Status of the interface address: NORMAL or DEL.
66