Reset Ipv6 Multicast Routing-Table - HP 5900 Series Command Reference Manual

<Sysname> reset ipv6 multicast forwarding-table ff0e::1
Related commands
display ipv6 multicast forwarding-table

reset ipv6 multicast routing-table

Use reset ipv6 multicast routing-table to clear IPv6 multicast routing entries.
Syntax
reset ipv6 multicast [ vpn-instance vpn-instance-name ] routing-table { { ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] | incoming-interface interface-type
interface-number } * | all }
Views
User view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command clears IPv6 multicast routing
entries on the public network.
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16, where "x" and
"y" represent any hexadecimal numbers from 0 to F.
prefix-length: Specifies an address prefix length. The default is 128. For an IPv6 multicast group address,
the value range for this argument is 8 to 128. For an IPv6 multicast source address, the value range for
this argument is 0 to 128.
incoming-interface: Specifies the IPv6 multicast routing entries that contain the specified incoming
interface.
interface-type interface-number: Specifies an incoming interface by its type and number.
all: Specifies all IPv6 multicast routing entries.
Usage guidelines
When a routing entry is deleted from the IPv6 multicast routing table, the associated forwarding entry is
also deleted from the IPv6 multicast forwarding table.
Examples
# Clear the routing entry for the IPv6 multicast group FF03::101 from the IPv6 multicast routing table on
the public network.
<Sysname> reset ipv6 multicast routing-table ff03::101
Related commands
display ipv6 multicast routing-table
272