Multicast-Vlan - HP 5900 Series Command Reference Manual

Table 18 Command output
Field
Multicast VLAN 100 Forwarding Table
Total 1 entries, 1 matched
00001
(1.1.1.1, 255.0.0.1)
Flags
List of sub-VLANs (3 in total)
Table 19 Values of the Flags field
Value
0x1
0x4
0x8
0x200
0x10000

multicast-vlan

Use multicast-vlan to configure a multicast VLAN and enter multicast VLAN view.
Use undo multicast-vlan to remove a multicast VLAN.
Syntax
multicast-vlan vlan-id
undo multicast-vlan { all | vlan-id }
Default
A VLAN is not configured as a multicast VLAN.
Views
System view
Predefined user roles
network-admin
Parameters
vlan-id: Specifies a VLAN ID in the range of 1 to 4094.
all: Specifies all multicast VLANs.
Description
Forwarding table for multicast VLAN 100.
Total number of forwarding entries, and the number of matching
entries.
Sequence number of the (S, G) entry.
(S, G) entry, where 0.0.0.0 in the S position means any multicast
sources.
Current status of the (S, G) entry. Different bits represent different
states of the entry. For values of this field, see
Sub-VLAN list of the multicast VLAN, and the total number of the
sub-VLANs.
Meaning
The entry is in inactive state.
The entry fails to update.
The sub-VLAN information fails to update for the entry.
The entry is in GR state.
The entry is a forwarding entry for a multicast VLAN.
58
Table 19.