HP 5900 Series Command Reference Manual page 327

Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] rp-info [ ipv6-group-address ]
Views
Any view
Predefine d user roles
netw ork-admin
network-operator
Paramete rs
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays RP information on the
public network.
ipv6-group-address: Sp
FF x0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y" represent any hexadecimal numbers
from 0 to F . If you do not specify an IPv6 multicast group, the command displays RP information for all
IPv6 multicast groups.
Examples
# Display information about the R
<Sysname> display ip
BSR RP address is: 7:1
Priority: 192
HoldTime: 180
Uptime: 03:01:10
Expires: 00:02:
S tatic RP address is: 7:1
Preferred: No
Configured ACL: 2003
RP mapping for this group is: 7:12:
# Display information abo
<Sysname> display ipv6 pim rp-
BSR RP information:
Scope: non-scoped
Group/MaskLen: FF00::/8
RP address
8:12::2 (local)
Group/MaskLen: FF23::/92 [B]
RP address
7:12::1 (local)
Static RP information:
RP address
3:3::1
3:3::2
3:3::3
ecifies an IPv6 multicast group by its address in the range of FFxy::/16 (excluding
P for the IPv6 multicast group FF0E::101 on the public network.
v6 pim rp-info ff0e::101
2::1
30
2::1
:1 (local host)
ut all RPs for all IPv6 multicast groups.
info
Priority
192
Priority
192
ACL
2000
2001
2002
317
HoldTime Uptime
180 03:01:36
HoldTime Uptime
180 00:00
Mode Pref erred
pim-sm No
bidir Yes
pim-sm No
Expires
00:02:29
Expires
:39 00:02:57