1.1.0.0/16
2.2.2.0/24
3.3.3.3/32
Table 30 Command output
Field
Destinations
Routes
Destination/Mask
Pre
RPF neighbor
Interface
display multicast rpf-info
Use display multicast rpf-info to display RPF information for multicast sources.
Syntax
display multicast [ vpn-instance vpn-instance-name ] rpf-info source-address [ group-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays RPF information for
multicast sources on the public network.
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address in the range of 224.0.1.0 to 239.255.255.255.
Examples
# Display the RPF information of multicast source 192.168.1.55 on the public network.
<Sysname> display multicast rpf-info 192.168.1.55
RPF information about source 192.168.1.55:
RPF interface: Vlan-interface1, RPF neighbor: 10.1.1.1
Referenced route/mask: 192.168.1.0/24
Referenced route type: igp
Route selection rule: preference-preferred
Load splitting rule: disable
10
7.12.0.1
7.11.0.1
20
7.11.0.1
50
7.12.0.1
Description
Number of the multicast destination addresses.
Number of routes.
Destination address and mask length.
Route preference.
IP address of the RPF neighbor to the reachable destination.
Outgoing interface to the reachable destination.
Vlan12
Vlan11
Vlan11
Vlan12
76