Ssm-Mapping (Mld View) - HP 5900 Series Command Reference Manual

Examples
# Set the global MLD querier's robustness variable to 5 on the public network.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] robust-count 5
Related commands
mld robust-count

ssm-mapping (MLD view)

Use ssm-mapping to configure MLD SSM mappings.
Use undo ssm-mapping to remove MLD SSM mappings.
Syntax
ssm-mapping ipv6-source-address acl6-number
undo ssm-mapping { ipv6-source-address | all }
Default
MLD SSM mappings are not configured.
Views
MLD view
Predefined user roles
network-admin
Parameters
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address.
acl6-number: Specifies an IPv6 basic ACL number in the range of 2000 to 2999. The specified IPv6
multicast source is mapped only to IPv6 multicast groups that the ACL permits. If the ACL does not exist
or the ACL does not have valid rules, the specified IPv6 multicast source is not mapped to IPv6 multicast
groups.
all: Removes all the MLD SSM mappings.
Usage guidelines
In an IPv6 basic ACL, the source keyword matches IPv6 multicast group address in MLD reports.
If you specify the vpn-instance keyword in an ACL rule, the rule does not take effect. The other optional
parameters except the time-range keyword and the fragment keyword in the ACL rules are ignored.
Examples
# Map the IPv6 multicast source 1::1 to the IPv6 multicast groups in the range of FF3E::/64 on the public
network.
<Sysname> system-view
[Sysname] acl ipv6 number 2001
[Sysname-acl6-basic-2001] rule permit source ff3e:: 64
[Sysname-acl6-basic-2001] quit
[Sysname] mld
[Sysname-mld] ssm-mapping 1::1 2001
296