Field
PIM assert hold interval
PIM triggered hello delay
PIM J/P interval
PIM J/P hold interval
PIM BSR domain border
PIM BFD
PIM passive
Number of routers on network not using DR
priority
Number of routers on network not using LAN
delay
Number of routers on network not using
neighbor tracking
display pim neighbor
Use display pim neighbor to display PIM neighbor information.
Syntax
display pim [ vpn-instance vpn-instance-name ] neighbor [ neighbor-address | interface interface-type
interface-number | verbose ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays PIM neighbor
information on the public network.
neighbor-address: Specifies a PIM neighbor by its IP address. If you do not specify a PIM neighbor, the
command displays information about all PIM neighbors.
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify an interface, the command displays PIM neighbor information on all interfaces.
verbose: Displays detailed PIM neighbor information. If you do not specify this keyword, the command
displays brief PIM neighbor information.
Examples
# Display brief information about all PIM neighbors on the public network.
<Sysname> display pim neighbor
Total Number of Neighbors = 2
Description
Assert holdtime timer.
Maximum delay for sending hello messages.
Interval between two join/prune messages.
Joined/pruned state holdtime timer.
Whether a PIM domain border is configured.
Whether PIM is enabled to work with BFD.
Whether PIM passive mode is enabled.
Number of routers that do not use the DR priority field on the
subnet where the interface resides.
Number of routers that do not use the LAN delay field on the
subnet where the interface resides.
Number of routers that are not enabled with neighbor tracking
on the subnet where the interface resides.
128