Dot1P-Priority (Igmp-Snooping View) - HP 5900 Series Command Reference Manual

Field
MAC group address
Host slots (0 in total)
Host ports (3 in total)
dot1p -priority (IG
Use dot1p-priority to set the 802.1p priority for IGMP mess
Use undo dot1p-priority to restore the default.
Syntax
dot1p-priority
undo dot1p-prio
Default
The 802.1p priority for IGMP messages is not configured.
Views
IGMP-snoo ping view
Predefine d user roles
network-admin
Parameters
priority-number: Sets an 802.1p priority for IGMP messages, in the range of 0 to 7. A h
a higher priority.
Usage guide lines
T his command and the igmp-snooping dot1p-priority command have the same function but different
effective ranges:
The dot1p-priority co
•
The igmp-snooping dot1 p-priority command tak
•
For a VLAN
command in I
Examples
# Set the 802.1p priority for IGMP messages to 3 glob
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] dot1p-priority 3
Related c ommands
igmp-snooping dot1p-priority
Description
Address of the MAC multicast group.
Member IDs of the member devices that have member ports and the total
number of the member device
Member ports, and the total number of the member ports.
MP-snooping view)
priority-number
rity
mmand in IGMP-snooping view takes effect on all VLANs.
, the igmp-snooping dot1p-priority command takes priority over the dot1p-priority
GMP-snooping view.
s (excluding the specified member device).
ages globally.
es effect on the current VLAN.
ally.
13
igher value means