Display Pim Claimed-Route - HP 5900 Series Command Reference Manual

Priority: 64
Hash mask length: 30
Uptime: 02:53:32
Candidate BSR address: 17.1.12.1
Priority: 64
Hash mask length: 30
Scope: 239.3.3.0/24
State: Pending
Bootstrap timer: 00:00:07
Candidate BSR address: 17.1.13.1
Priority: 64
Hash mask length: 30
Table 38 Command output
Field
Scope-zone expiry timer
Elected BSR address
Candidate BSR address
Priority
Uptime

display pim claimed-route

Use display pim claimed-route to display information about all routes that PIM uses.
Syntax
display pim [ vpn-instance vpn-instance-name ] claimed-route [ source-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays information about all
routes that PIM uses on the public network.
source-address: Specifies a multicast source by its IP address. If you do not specify a multicast source, the
command displays information about all routes that PIM uses.
Examples
# Display information about all routes that PIM uses on the public network.
<Sysname> display pim claimed-route
RPF-route selecting rule: longest-match
Description
Scoped zone aging timer.
Address of the elected BSR.
Address of the candidate BSR.
BSR priority.
Length of time the BSR has been up.
122