Report-Aggregation (Mld-Snooping View); Reset Mld-Snooping Group - HP 5900 Series Command Reference Manual

Usage guidelines
This command takes effect only on the IPv6 multicast groups that a port joins dynamically.
This command and the mld-snooping overflow-replace command have the same function but different
effective ranges:
The overflow-replace command in MLD-snooping view takes effect on all ports.
•
The mld-snooping overflow-replace command takes effect on the current port.
•
For a port, the mld-snooping overflow-replace command takes priority over the overflow-replace
command in MLD-snooping view.
Examples
# Enable the IPv6 multicast group replacement feature globally for VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] overflow-replace vlan 2
Related commands
mld-snooping overflow-replace

report-aggregation (MLD-snooping view)

Use report-aggregation to enable MLD report suppression.
Use undo report-aggregation to disable MLD report suppression.
Syntax
report-aggregation
undo report-aggregation
Default
MLD report suppression is enabled.
Views
MLD-snooping view
Predefined user roles
network-admin
Examples
# Disable MLD report suppression.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] undo report-aggregation

reset mld-snooping group

Use reset mld-snooping group to remove the dynamic MLD snooping forwarding entries for IPv6
multicast groups.
233