Reset Msdp Peer - HP 5900 Series Command Reference Manual

Syntax
peer peer-address sa-request-policy [ acl acl-number ]
undo peer peer-address sa-request-policy
Default
SA request messages are not filtered.
Views
MSDP view
Predefined user roles
network-admin
Parameters
peer-address: Specifies an MSDP peer by its IP address.
acl-number: Specifies an IPv4 basic ACL number in the range of 2000 to 2999. If you specify an ACL,
the switch accepts only SA requests that the ACL permits. All SA requests are filtered out when any of the
following conditions exists:
You do not specify an ACL.
•
The specified ACL does not exist.
•
The specified ACL does not have valid rules.
•
Usage guidelines
In an IPv4 basic rule, the source keyword matches the multicast group addresses in SA request messages.
If you specify the vpn-instance keyword in an ACL rule, the rule does not take effect. The other optional
parameters except the time-range keyword and the fragment keyword in the ACL rules are ignored.
Examples
# On the public network, configure an SA request policy to process SA requests originated from the
MSDP peer 175.58.6.5 with multicast groups in the range of 225.1.1.0/24.
<Sysname> system-view
[Sysname] acl number 2001
[Sysname-acl-basic-2001] rule permit source 225.1.1.0 0.0.0.255
[Sysname-acl-basic-2001] quit
[Sysname] msdp
[Sysname-msdp] peer 175.58.6.5 sa-request-policy acl 2001

reset msdp peer

Use reset msdp peer to reset the TCP connection with an MSDP peer and clear statistics for the MSDP
peer.
Syntax
reset msdp [ vpn-instance vpn-instance-name ] peer [ peer-address ]
Views
User view
180