Load-Splitting (Ipv6 Mrib View) - HP 5900 Series Command Reference Manual

Syntax
ipv6 multicast routing [ vpn-instance vpn-instance-name ]
undo ipv6 multicast routing [ vpn-instance
Default
IPv6 multicast r
Views
System view
Predefined u ser roles
network-admin
paramete rs
vpn-instan ce vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 c haracters. If you do not specify a VPN instance, the command enables IPv6 multicast routing
on the public network.
Usage gu idelines
O ther Layer 3 IPv6 multicast commands take effect only when IPv6 multicast routing is enabled.
The switch does not forward IPv6 multicast packets before IPv6 multicast routing is
Examples
# Enable IPv6 multicast routing and ente
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6]
# Enable IPv6 multicast routing and enter IPv6 MRIB view in t
<Sysname> system-view
[Sysname] ipv6 multicast routing vpn-in
[Sysname-mrib6-mvpn]

load-splitting (IPv6 MRIB view)

Use load-splitting to enable load splitting of IPv6 multicast traffic.
Use multicast load-splitting to restore the
Syntax
load-splitting { source | source-group }
undo load-splitting
Default
Load splitting of I
Views
IPv6 MRIB view
Predefined u ser roles
network-admin
outing is disabled.
Pv6 multicast traffic is disabled.
vpn-instance-name ]
r IPv6 MRIB view on the public network.
he VPN instance mvpn.
stance mvpn
default.
269
enabled.