Ipv6 Multicast Routing And Forwarding Commands; Display Ipv6 Mrib Interface - HP 5900 Series Command Reference Manual

IPv6 multicast routing and forwarding
commands
The term "interface" in this chapter collectively refers to VLAN interfaces and Layer 3 Ethernet interfaces.
You can set an Ethernet port as a Layer 3 interface by using the port link-mode route command (see
Layer 2—LAN Switching Configuration Guide).

display ipv6 mrib interface

Use display ipv6 mrib interface to display information about interfaces maintained by the IPv6 MRIB,
including IPv6 PIM interfaces, MLD interfaces, register interfaces, InLoopBack0 interfaces, and null0
interfaces.
Syntax
display ipv6 mrib [ vpn-instance vpn-instance-name ] interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays information about
interfaces maintained by the IPv6 MRIB on the public network.
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, the command displays information about all interfaces maintained by the IPv6 MRIB.
Examples
# Display information about all interfaces maintained by the IPv6 MRIB on the public network.
<Sysname> display ipv6 mrib interface
Interface: Vlan-interface1
Index: 0x00000001
Current state: up
MTU: 1500
Type: BROADCAST
Protocol: PIM-DM
PIM protocol state: Enabled
Address list:
1. Local address : FE80:7:11::1/10
Remote address: ::
Reference : 1
State : NORMAL
255