Display Ipv6 Pim Df-Info - HP 5900 Series Command Reference Manual

Usage guidelines
You can display information about learned C-RPs only on the BSR. On other devices, you can display
information about the locally configured C-RPs.
Examples
# Display information about learned C-RPs on the public network.
<Sysname> display ipv6 pim c-rp
Scope: non-scoped
Group/MaskLen: FF00::/8 [B]
C-RP address
8:12::2 (local)
Group/MaskLen: FF23::/92 Expires: 00:02:07
# Display information about the locally configured C-RPs.
<Sysname> display ipv6 pim c-rp local
Candidate RP: 8:12::2(Loop1)
Priority: 192
HoldTime: 150
Advertisement interval: 60
Next advertisement scheduled at: 00:00:46
Table 89 Command output
Field
Group/MaskLen
[B]
C-RP address
HoldTime
Uptime
Expires
Candidate RP
Advertisement interval
Next advertisement scheduled at

display ipv6 pim df-info

Use display ipv6 pim df-info to display the DF information of IPv6 BIDIR-PIM.
Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] df-info [ ipv6-rp-address ]
Priority HoldTime
192 150
Description
IPv6 multicast group to which the C-RP is designated.
The C-RP provides services for IPv6 BIDIR-PIM. If this field is not displayed,
the C-RP provides services for IPv6 PIM-SM.
IPv6 address of the C-RP. If the C-RP resides on the device where the
command is executed, this field displays (local) after the address.
C-RP lifetime.
Length of time the C-RP has been up:
•
w—Weeks.
•
d—Days.
•
h—Hours.
Remaining lifetime for the C-RP and IPv6 multicast group.
IPv6 address of the locally configured C-RP.
Interval between two advertisement messages sent by the locally
configured C-RP.
Remaining time for the locally configured C-RP to send the next
advertisement message.
308
Uptime Expires
00:27:48 00:01:43