Igmp-Snooping Router-Port-Deny; Igmp-Snooping Source-Deny - HP 5900 Series Command Reference Manual

router-aging-time (IGMP-snooping view)
•
igmp- snooping router-port-deny
Use igmp-snooping router-port-deny to disable a port from becom
Use undo igmp-snooping router-port-deny to restore the default.
Syntax
igmp-snooping router-port-deny [ vlan vlan-list ]
undo igmp-snooping router-port-deny [ vlan vlan-list ]
Default
A port can become a dynamic router port.
Views
Layer 2 Ethern
Predefine d user roles
netw ork-admin
Paramete rs
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its
ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to
40 94. If you specify VLANs, the command takes effect only when the port belongs to the specified
VL ANs. If you do not specify a VLAN, the command takes effect on all VLANs to which the port belongs.
Examples
# Disable Ten-GigabitEthernet 1/0/1 from becoming a
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1]
igmp- snooping source-deny
Use igmp-snooping source-deny to enable multicast source port filtering on a port to dis
received multicast data packets.
Use undo igmp-snooping source-deny to disable multicast source port filtering on a port.
Syntax

igmp-snooping source-deny

undo igmp-snooping source-deny
Default
Multicast source port filtering is disabled, and the port can connect to both multicast sources and
multicast receivers.
Views
Layer 2 Ethern
et interface view, Layer 2 aggregate interface view
et interface view
dynamic router port in VLAN 2.
igmp-snooping router-port-deny vlan 2
34
ing a dynamic router port.
card all the