Pim Timer Graft-Retry; Pim Timer Hello - HP 5900 Series Command Reference Manual

state-refresh-ttl (PIM view)
•

pim timer graft-retry

Use pim timer graft-retry to set a graft retry timer.
Use undo pim timer graft-retry to restore the default.
Syntax
pim timer graft-retry interval
undo pim timer graft-retry
Default
The graft retry timer is 3 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets a graft retry timer in the range of 1 to 65535 seconds.
Examples
# Set the graft retry timer to 80 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim timer graft-retry 80

pim timer hello

Use pim timer hello to set the hello interval on an interface.
Use undo pim timer hello to restore the default.
Syntax
pim timer hello interval
undo pim timer hello
Default
The hello interval on an interface is 30 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets a hello interval in the range of 0 to 18000 seconds. If you set the value to 0 seconds, the
interface does not send hello messages.
151