Subvlan (Ipv6 Multicast Vlan View) - HP 5900 Series Command Reference Manual

Examples
# Clear all IPv6 multicast groups in all IPv6 multicast VLANs.
<Sysname> reset ipv6 multicast-vlan group
Related commands
display ipv6 multicast-vlan group

subvlan (IPv6 multicast VLAN view)

Use subvlan to assign sub-VLANs to an IPv6 multicast VLAN.
Use undo subvlan to remove sub-VLANs from an IPv6 multicast VLAN.
Syntax
subvlan vlan-list
undo subvlan { all | vlan-list }
Default
An IPv6 multicast VLAN does not have sub-VLANs.
Views
IPv6 multicast VLAN view
Predefined user roles
network-admin
Parameters
vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its ID
or a range of VLANs in the form of start-vlan-id to end-vlan-id. The value range for the VLAN ID is 1 to
4094.
all: Specifies all sub-VLANs of the current IPv6 multicast VLAN.
Usage guidelines
The VLANs to be configured as sub-VLANs must exist and must not be IPv6 multicast VLANs or
sub-VLANs of any other IPv6 multicast VLANs.
Examples
# Configure VLAN 10 through VLAN 15 as sub-VLANs of multicast VLAN 100.
<Sysname> system-view
[Sysname] ipv6 multicast-vlan 100
[Sysname-ipv6-mvlan-100] subvlan 10 to 15
254