This command and the mld-snooping max-response-time command have the same function but different
effective ranges:
The max-response-time command in MLD-snooping view takes effect on all VLANs.
•
The mld-snooping max-response-time command takes effect on the current VLAN.
•
For a VLAN, the mld-snooping max-response-time command takes priority over the max-response-time
command in MLD-snooping view.
Examples
# Set the global maximum response time for MLD general queries to 5 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] max-response-time 5
Related commands
mld-snooping max-response-time
mld-snooping
Use mld-snooping to enable MLD snooping globally and enter MLD-snooping view.
Use undo mld-snooping to disable MLD snooping globally.
Syntax
mld-snooping
undo mld-snooping
Default
MLD snooping is globally disabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable MLD snooping globally and enter MLD -snooping view.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping]
Related commands
enable (MLD-snooping view)
•
mld-snooping enable
•
mld-snooping done source-ip
Use mld-snooping done source-ip to configure a source IPv6 address for MLD done messages.
Use undo mld-snooping done source-ip to restore the default.
212