HP 5900 Series Command Reference Manual page 259

Syntax
display ipv6 multicast-vlan forwarding-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address
[ prefix-length ] | slot slot-number | subvlan vlan-id | vlan vlan-id ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If you do not specify an IPv6
multicast source, the command displays IPv6 multicast VLAN forwarding entries for all IPv6 multicast
sources.
prefix-length: Specifies a prefix length of the IPv6 multicast source address. The value range is 0 to 128
and the default value is 128.
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address in the range of FFxy::/16,
where "x" and "y" represent any hexadecimal numbers from 0 to F. If you do not specify an IPv6
multicast group, the command displays information about IPv6 multicast VLAN forwarding entries for all
IPv6 multicast groups.
prefix-length: Specifies a prefix length of the IPv6 multicast group address. The value range is 8 to 128
and the default value is 128.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays IPv6 multicast VLAN forwarding entries on the
master device.
subvlan vlan-id: Specifies a sub-VLAN by its ID. If you do not specify a sub-VLAN, the command displays
IPv6 multicast VLAN forwarding entries for all sub-VLANs.
vlan vlan-id: Specifies an IPv6 multicast VLAN by its ID in the range of 1 to 4094. If you do not specify
an IPv6 multicast VLAN, the command displays IPv6 multicast VLAN forwarding entries for all IPv6
multicast VLANs.
Examples
# Display all IPv6 multicast VLAN forwarding entries.
<Sysname> display ipv6 multicast-vlan forwarding-table
IPv6 multicast VLAN 100 Forwarding Table
Total 1 entries, 1 matched
00001. (1::1, FF0E::1)
Flags: 0x10000
IPv6 multicast VLAN: 100
List of sub-VLANs (3 in total):
1: VLAN 10
2: VLAN 20
3: VLAN 30
249