HP 5900 Series Command Reference Manual page 12

Query-interval: 125s
General-query source IP: 1.1.1.1
Special-query source IP: 2.2.2.2
Report source IP: 3.0.0.3
Leave source IP: 1.0.0.1
Dot1p-priority: 2
IGMP snooping information: VLAN 10
IGMP snooping: Enabled
Drop-unknown: Enabled
Version: 3
Host-aging-time: 260s
Router-aging-time: 260s
Max-response-time: 10s
Last-member-query-interval: 1s
Querier: Disabled
Query-interval: 125s
General-query source IP: 1.1.1.1
Special-query source IP: 2.2.2.2
Report source IP: 3.0.0.3
Leave source IP: 1.0.0.1
Dot1p-priority: --
Table 1 Command output
Field
IGMP snooping
Drop-unknown
Version
Host-aging-time
Router-aging-time
Max-response-time
Last-member-query-interval
Report-aggregation
Dot1p-priority
Querier
Query-interval
General-query source IP
Description
IGMP snooping status:
•
Enabled.
•
Disabled.
Status of dropping unknown multicast data:
•
Enabled.
•
Disabled.
IGMP snooping version.
Aging timer for the dynamic member port.
Aging timer for the dynamic router port.
Maximum response time for IGMP general queries.
Interval for sending IGMP group-specific queries.
Status of IGMP report suppression:
•
Enabled.
•
Disabled.
802.1p priority for IGMP messages. If the priority is not configured,
this field displays two hyphens (--).
Whether the IGMP snooping querier is enabled.
Interval for sending IGMP general queries.
Source IP address of IGMP general queries.
2